12V 60W JK-AEWP12.060.001
keyword:
Changsha Jianke
OE No.:
12V 60W
Car series:
New energy cars
12V 60W JK-AEWP12.060.001
JK-AEWP12.060.001 New Energy Electric Water Pump
Parameters:
1. Operating voltage: DC 9-16 V
2. Operating current: ≤4.7A
3. Control method: LIN
4. Rated flow rate: 20 L/min (max. 32 L/min)
5. Protection rating: IP67
6. Rated operating pressure: 70 kPa (max. 100 kPa)
7. Rated Operating Noise Level: ≤42 dB(A) at 0.5m distance, ambient noise below 20 dB(A)
8. Net Weight: ≤600g
9. Insulation Class: Class E
10. Sealing Performance: Under 250 kPa pressure, maintains pressure for 15 seconds with pressure variation ≤300 Pa/min
Operating Conditions:
1. Ambient temperature: -40 to 90°C
2. Medium temperature: -40 to 90°C
3. Operating medium: Antifreeze
4. Power supply type: Direct current (DC)
1. Overview
An Auto New Energy Electric Water Pump is a critical thermal management component designed for new energy vehicles (NEVs), including battery electric vehicles (BEVs), plug-in hybrid electric vehicles (PHEVs), and fuel cell electric vehicles (FCEVs). Unlike traditional mechanical water pumps driven by the engine crankshaft, it is an electrically driven pump that provides precise, independent coolant circulation.
2. Key Features
Electric Drive: Powered by the vehicle’s high-voltage or low-voltage electrical system, allowing operation independent of the engine. This enables cooling even when the main propulsion system is off.
High Efficiency & Precision: Uses brushless DC (BLDC) motors for high energy efficiency, reduced noise, and long lifespan. Pump speed is digitally controlled for precise flow rates.
Compact & Lightweight Design: Engineered to save space and reduce weight, contributing to overall vehicle efficiency.
Smart Thermal Management: Integrates with the vehicle’s thermal management system to optimize temperature for batteries, power electronics, electric motors, and cabin climate control.
3. Primary Functions
Battery Cooling/Heating: Maintains the battery pack within an optimal temperature range (typically 20°C–40°C) to ensure safety, performance, and longevity.
Power Electronics Cooling: Cools the inverter, DC-DC converter, and onboard charger.
Electric Motor & Controller Cooling: Prevents overheating of the drive motor and its controller.
Integrated Thermal System: In heat pump-based HVAC systems, it may circulate refrigerant or coolant to transfer heat efficiently.
RELATED PRODUCTS
220V 550W JK-AEWP220.500.006 Energy storage water pump
1. Rated voltage: 220VAC 50Hz 2. Voltage range: 170–260VAC 3. Rated current: 2.3A
PRODUCT MESSAGE