Camshaft Position Sensor JK-S046
keyword：
Changsha Jianke
OE No.:
1W7Z6B288AB
Car series：
FORD CROWN VICTORIA 1992- 1999 E- 150 1997-2001 ECONOLINE SUPER DUTY 1997- 1999 EXCURSION 2000-2001 F- 150 1997- 1999 F-250 1997- 1999 F-250 SUPER DUTY 1999-2001 MUSTANG 1996- 1999 TAURUS 1996- 1999 TEMPO 1990- 1994 THUNDERBIRD 1994- 1997 LINCOLN MARK VI
Camshaft Position Sensor JK-S046
Camshaft Position Sensor JK-S046
OE No.:
FORD
1W7Z6B288AB
XR822550XR83303
XR849456
Car application:
FORD
CROWN VICTORIA 1992- 1999
E- 150 1997-2001
ECONOLINE SUPER DUTY 1997- 1999
EXCURSION 2000-2001
F- 150 1997- 1999
F-250 1997- 1999
F-250 SUPER DUTY 1999-2001
MUSTANG 1996- 1999
TAURUS 1996- 1999
TEMPO 1990- 1994
THUNDERBIRD 1994- 1997
LINCOLN
MARK VIII 1993- 1998
NAVIGATOR 1998-2001
TOWN CAR 1991- 1999
Camshaft Position Sensor Core Function:
The Camshaft Position Sensor (CMP sensor) is a critical electronic component in modern internal combustion engines. Its primary function is to monitor the rotational position and speed of the camshaft(s) and relay this real-time data to the Engine Control Module (ECM) or Powertrain Control Module (PCM).
2. Primary Purpose & Role in Engine Management:
The ECM uses the signal from the CMP sensor, in conjunction with data from the Crankshaft Position Sensor (CKP sensor), to achieve precise engine management. Specifically, it enables:
Fuel Injection Timing: Determines which cylinder is in its intake stroke to trigger sequential fuel injection for optimal efficiency and power.
Ignition Timing (Spark Timing): Precisely controls when the spark plug fires, especially in engines with Direct Ignition Systems (one coil per plug).
Variable Valve Timing (VVT) Control: Acts as a feedback sensor for VVT systems, allowing the ECM to adjust camshaft timing for performance, economy, and emissions.
Cylinder Identification: Helps the ECM identify the position of cylinder #1 for correct firing order sequencing.
In essence, it tells the engine computer "where" the camshaft is, so the computer knows "when" to inject fuel and, in gasoline engines, "when" to fire the spark for each specific cylinder.
3. Common Types & Operating Principles:
There are three main types of camshaft position sensors, categorized by their technology:
Magnetic (Variable Reluctance) Type: Uses a permanent magnet and a coil. As a reluctor wheel (notched ring) on the camshaft passes by, it changes the magnetic field, inducing an analog AC voltage signal. This type is passive (does not require an external power source) and is known for its durability.
Hall-Effect Type: Uses a Hall-effect semiconductor chip. When a shutter ring or vane on the camshaft interrupts a magnetic field, the sensor outputs a precise digital square wave signal (on/off). This type requires an external power supply and provides a more accurate signal, especially at low speeds.
Magneto-Resistive Type: A more advanced variation that can detect both direction and very fine rotational changes, used in some newer VVT systems.
4. Typical Location:
The sensor is mounted directly adjacent to a camshaft, often at the cylinder head's front or rear, near the timing cover. It is positioned with a small air gap (clearance) separating it from a reluctor wheel, tone ring, or a single notch/magnet on the camshaft itself.
RELATED PRODUCTS
220V 550W JK-AEWP220.500.006 Energy storage water pump
1. Rated voltage: 220VAC 50Hz 2. Voltage range: 170–260VAC 3. Rated current: 2.3A
PRODUCT MESSAGE
Changsha Jianke Electronics Co., Ltd
Phone: 86-731-88552129 (Personnel)
Phone: 86-731-88081666 (Sales)
Email: sales@jkaec.com
Address: No. 10, Aviation Road, Wangcheng Economic and Technological Development Zone, Changsha City
tel：
Tel：
E-mail：
在线客服添加返回顶部
右侧在线客服样式 1,2,3 1
图片alt标题设置： Changsha Jianke Electronics Co., Ltd
表单验证提示文本： Content cannot be empty!
循环体没有内容时： Sorry,no matching items were found.
CSS / JS 文件放置地