Door and window control system (door and window control system), mainly composed of four door control units of the car, namely the left front door control unit, left rear door control unit, right front door Control unit, right rear door control unit.
The main function of the door control unit is to control the unlocking and locking of the car door, the lifting control of the window, the adjustment of the rearview mirror, folding, heating and other related controls.
The window controller is to control the window glass lifting and door status on the door, or other components on the door, including rearview mirror and door lock.
The main communication method of the window controller is CAN and LIN bus or switch direct feedback.
The left front window controller has the highest control level, and can directly or indirectly control the other three windows through the CAN/LIN bus.
The window control module of Jianke Electronics can be applied to either individual window control or the entire door control.
Advantages of Jianke Electronics
Models: All commonly used cars, SUVs, MPV models
All doors: front left/front right/rear left/rear right
Control method: original compatible
Control components: rearview mirror, car window, door lock, signal indicator, panel switch
Communication method: LIN/CAN
Window position: Hall/ripple recognition
Window Anti-Pinch: Adaptive Anti-Pinch
Remote key: open/close window
Power end anti-interference test
Signal end anti-interference test
ISO7637
Over 2000h, +85° high temperature endurance test
Over 2000h, -40° low temperature endurance test
High and low temperature impact test
Salt spray test
Phone: +86 731-88081666(IDD)
Fax: 0731-88081666
Email: sales@jkaec.com
Address: Wangcheng Economic and Technological Development Zone, Changsha
10 Hangkong Road
Copyright © 长沙市健科电子有限公司粤ICP备19004628号粤ICP备19004628号
长沙市健科电子有限公司 深圳市健科电子有限公司 Website Map
Internet brand service:CTMON