Fuel injection system refers to a fuel supply device that uses a fuel injector to directly inject a certain amount of fuel into a cylinder or intake port under a certain pressure.
Fuel pump is a professional term for the auto parts industry. It is one of the basic components of the fuel injection system of EFI vehicles. It is located inside the fuel tank of the vehicle. The fuel pump works during startup and engine operation. If the engine is stopped and the ignition switch is still on, the trip computer control module turns off the power of the fuel pump to Avoid accidental ignition.
The function of the electric fuel pump is to draw fuel from the fuel tank, pressurize it and deliver it to the fuel supply pipe, and cooperate with the fuel pressure regulator to establish a certain fuel pressure. Ensure continuous fuel supply to the fuel injectors.
Jianke Electronics' advantages:
Jianke electronic high-performance electronic fuel pump controller makes the engine always work in the most excellent performance.
Control method: square wave
Communication method: PWM/LIN
Wide voltage: adapt to 8.5V~20.0V
Quick response: start time 150ms
High energy saving: supply oil on demand
Self-cleaning: The unique self-cleaning function of Jianke fuel pump. When the fuel pump is clogged in a small amount, this function will be automatically activated to remove clogged debris.
Protection mode: overvoltage/undervoltage/overcurrent/overload/overtemperature/blocking/phase loss/short circuit, etc.
Power end anti-interference test
Signal end anti-interference test
ISO7637
Over 2000h, 105° high temperature endurance test
Over 2000h, -40° low temperature endurance test
High and low temperature impact test
Salt spray test
Vibration test
CITROEN
Audi
Phone: +86 731-88081666（IDD）
Fax: 0731-88081666
Email: sales@jkaec.com
Address: Wangcheng Economic and Technological Development Zone, Changsha
10 Hangkong Road
Copyright © 长沙市健科电子有限公司粤ICP备19004628号粤ICP备19004628号
长沙市健科电子有限公司 深圳市健科电子有限公司 Website Map
Internet brand service：CTMON
Contact
Telephone