Auto Blower Motor Controller

Auto Blower Motor Controller

Automotive air conditioning system

Automotive air-conditioning system is to realize the cooling, heating, ventilation and air purification of the air in the cabin, used for the temperature, humidity, air cleanliness and air flow in the cabin Adjust and control the ventilation device in the best condition.


The air-conditioning system consists of refrigeration system, heating system, ventilation and air purification device and control system.


Refrigeration system: use the liquefaction and vaporization of the condenser to discharge the heat in the cabin to the outside of the vehicle. Generally composed of condenser, liquid storage tank, compressor, high and low pressure pipeline, evaporator, expansion valve, etc.


Heating system: The engine coolant is used as the heat source to introduce the warm water tank in the blower box to heat the wind blown by the blower.


Ventilation and air purification device: adjust the airflow and ventilation in the car, and filter the air entering the car. It is composed of blower, air duct and air dampers.

Consult immediately Alibaba Download files
Car blower controller

Car blowers mainly send air generated by air conditioning cooling or heating to the car. Jianke electronic high-performance blower controller can adjust and control the temperature, humidity, air cleanliness and air flow in the car compartment in the best state.


Jianke electronic blower controller is briefly described as follows:


Features:


Control method: SVPWM/FOC

Power range: 200W ~ 1000W

Temperature range: -40°~ 125°

Communication method: PWM/LIN/CAN

Protection mode: overvoltage/undervoltage/overcurrent/overload/overtemperature/blocking/phase loss/short circuit, etc.


Strict electrical test before leaving the factory:


Power end anti-interference test

Signal end anti-interference test

ISO7637



Durability Test:


Over 2000h, 125° high temperature endurance test

Over 2000h, -40° low temperature endurance test

High and low temperature impact test

Salt spray test

Vibration test



Main model


SPAL

EBM

Toyota series

Changsha Jianke Contact Information

Phone: +86 731-88081666(IDD)

Fax: 0731-88081666

Email: sales@jkaec.com

Address: Wangcheng Economic and Technological Development Zone, Changsha
10 Hangkong Road

Contact QQ Top